LBK-10-SW Barbecue Island
LTR50001142, Rev. A
Appendix
www.calflamebbq.com
30
You will need:
7mm wrench, socket, or nut driver
•
One or two 1.75mm orifices (depending on
•
your side burner)
Pipe compound suitable for natural gas
•
Remove the grate, burner cap and burner
a.
diffuser from the side burner.
Using a 7mm wrench, remove the orifice for
b.
the burner.
Apply a small amount of pipe compound to
c.
the orifice threads.
Screw in the orifice until it is finger tight.
d.
Tighten the orifice with the 7mm wrench.
e.
If you have dual side burners, repeat the
f.
previous steps for the second burner.
Replace the side burner orifices
2 .
Mark the rating plate
3 .
After conversion has been completed, mark the rating
plate as NG with an indelible marker.
