LBK-10-SW Barbecue Island
LTR50001142, Rev. A
Installation and Connection
www.calflamebbq.com
12
6 . Connect to gas source .
Liquid Propane Connection
Use the pressure regulator and hose assembly
supplied with the grill, or a regulator and hose
assembly with the same specifications. Replacement
LP regulator and hose must have a coupling nut
that will connect to a QCC-1 cylinder valve on one
end and a female fitting that will connect to a 3/8”
tapered fitting on the grill manifold. See the figures
below.
Connect the brass fitting to the manifold behind the
grill. Do not use Teflon tape or plumber’s dope. Do
NOT remove the NG regulator from the manifold.
Connect the coupling nut to the LP cylinder valve.
When you are finished connecting to the gas source,
perform a leak test.
Gas Cylinder Orientation
LP gas cylinder must be up oriented upright during operation for proper vapor withdrawl. Operating the grill
with the cylinder on it side will allow liquid gas to flow into the regulator. Erratic gas flow will occur, resulting
in possible flare-ups or explosion.
Natural Gas Connection
Connect the gas line to the NG stub-up inside the
barbecue island. When you are finished connecting
to the gas source, perform a leak test.
