CAKEWALK UM-2G, Owner'S Manual

Page: 22 / 44

22
Basic Use
This chapter describes different basic methods of connecting the UM-2G according to how
the UM-2G is to be used.
To transmit MIDI messages from a MIDI keyboard or digital piano to the sequencer software
or make a MIDI recording of a keyboard performance or other performance using sequencer
software on your computer, make the following connections and settings.
fig.connect-in_e
MIDI device setting
* Make the device settings within the sequencer software.
[MIDI THRU] switch setting
MIDI messages from the MIDI device (e.g, MIDI keyboard, digital piano) connected to the UM-
2G’s MIDI IN connector are transmitted to the computer.
* Don’t change the setting of the [MIDI THRU] switch while you’re using the UM-2G. Doing so will
cause MIDI errors.
Basic Connections and MIDI Flow
Transmitting MIDI Messages from a MIDI Keyboard or Digital Piano to the
Sequencer Software
MIDI IN
1(UM-2G)
2(UM-2G)
[MIDI THRU] switch OFF
MIDI IN
MIDI Keyboard
Digital Piano
MIDI messages are transmitted
to the sequencer software.
Connect to the
MIDI OUT connector
of the MIDI keyboard
or digital piano.
: MIDI Message Flow
Connect to the
computer’s
USB connector.
[MIDI THRU] switch OFF
UM-2G_e.book 22 ページ ２００８年１１月１２日 水曜日 午後１０時６分