28
Troubleshooting
2.
Choose
Install the software automatically (Recommended)
and click
[Next]
.
3.
If the
Hardware Installation
dialog box appears, click
[Continue Anyway]
to proceed
with the installation.
* If you are unable to continue, click
[OK]
to stop the installation, and refer to “Driver Signing
Options Settings (Windows XP)” (p. 27) and then reinstall the driver.
4.
When the screen indicates
Completing the Found New Hardware Wizard
, click
[Finish]
.
3.
The screen will indicate
“Installation complete.”
Click
[Close]
to close the Driver Setup dialog box.
4.
If the
System Settings Change
dialog box appears, click
[Yes]
. Windows will restart.
If you were unable to complete the installation with the above procedure, uninstall the UM-
2G driver as described in “Deleting the Driver” (p. 34), and then reinstall the driver as
described in “Getting Connected and Installing Drivers” (p. 11).
Could you have connected the UM-2G to a different USB port?
Depending on your operating system, connecting the UM-2G to a different USB port may
cause a number to automatically be added at the beginning of the device name; this should
not be cause for concern when using the UM-2G.
If you want to return to the original device name, without a numeral, either connect the UM-
2G to the same USB port as you did when installing it, or uninstall the UM-2G driver as
described in “Deleting the Driver” (p. 34), and then reinstall it as described in “Getting
Connected and Installing Drivers” (p. 11).
A Numeral Such as “2- “ Has Started Appearing at the Beginning of the Device
Name
UM-2G_e.book 28 ページ ２００８年１１月１２日 水曜日 午後１０時６分
Summary of Contents for UM-2G
Page 1: ...UM 2G_e book 1...
Page 40: ...40 MEMO UM 2G_e book 40...
Page 42: ...42 For EU Countries For China UM 2G_e book 42...
Page 43: ...UM 2G_e book 43...
