Cajun Injector Injector, Owner'S Manual

Page: 7 / 42

Operating Instructions
Step 1 •
Mount control panel with heating element into bracket on outer shell of the unit.
Step 2 •
Plug power cord into an outlet (refer to “User Precautions and Important Safety Tips”
section of manual). Power light will illuminate indicating the unit is plugged in, and the
heating element is mounted correctly; and controller on unit is ready to be activated.
Step 3 •
Note: The Temperature Controller must be set prior to the timer functioning.
Step 4 •
When cooking time has elapsed and food is done, press ON/OFF button to
turn off heating element and unplug power cord.
When lifting food out of cooking liquid, allow excess oil or water to drain from the
fryer basket by hooking the basket on side of pot. Remove the drained basket shortly
thereafter.
When using the quick drain system, make sure that the basket is firmly in place on
rim of pot before releasing handle so basket will not fall back into hot oil or water
causing injury.
Do not use appliance without water or oil in pot. It can be severely damaged and
dangerous to the user if heated while empty.
Always place unit on a level, very stable surface to prevent tipping over
Do not mix different types of oil at the same time. Purchase a commercial blended oil
if so desired. Never melt or use shortening, solid fats or lard in this appliance.
To set temperature:
Press ON button. •
Press TEMP MODE button once; the LCD •
display will blink.
Use UP and DOWN arrow buttons to set
•
temperature.
Press START button, this will turn the
•
heating element ON.
To set timer:
Press TIME MODE button once; LCD dis- •
play will blink.
Use UP and DOWN buttons to set TIME
•
in MINUTES.
Maximum Time is 90 minutes.
•
Timer will automatically start after you •
have selected Time.