8 - ENG PN MN236 A | User Manual
Sprint / Stroller / Hi Flow Stroller
Operating Instructions
(Cannula is not included.)
1. Push the cannula breathing tube firmly on to the
oxygen tube connector.
2. Adjust your cannula breathing tube to the proper
position so that you will be able to breathe the
oxygen comfortably.
3. Turn the flow control knob on top of the Sprint/
Stroller/Hi Flow Stroller/Hi Flow Stroller clock-
wise until the prescribed flow rate (numeral)
is visible in the knob “window” and a positive
detent is felt.
Caution: Out-of-specification oxygen
flow will result if the flow control knob
is set between flow rates.
4. You should be receiving oxygen now. To stop
flow of oxygen, turn the flow control knob coun-
terclockwise to the off (0) position.
Caution: Always turn the flow control
knob off (0) when not in use.
Caution: Check liquid level gauge only
after the valve is closed.
Caution: If the Sprint/Stroller/Hi Flow Stroller is
being refilled immediately after a period of use,
fill it, and then wait 10 minutes after filling with
the FCV set at zero for the pressure to stabilize.
Then operate as normal.
WARNING: DO NOT OPERATE SPRINT/
STROLLER/HI FLOW STROLLER WHILE AT-
TACHED TO THE STATIONARY UNIT.
WARNING: IF THE SPRINT/STROLLER/HI FLOW
STROLLER DOES NOT SEPARATE EASILY, DO NOT
USE FORCE. THE UNITS MAY BE FROZEN TOGETH-
ER. LEAVE THE UNITS CONNECTED AND WAIT
UNTIL THE UNITS WARM UP — THEN THEY WILL
SEPARATE EASILY. DO NOT TOUCH ANY FROSTED
PARTS. WARNING: SHOULD THE LEAKAGE BE
EXCESSIVE TO THE POINT THAT A STREAM OF
LIQUID IS PRESENT, LEAVE THE AREA AND CALL
YOUR HEALTH CARE PROVIDER IMMEDIATELY.
WARNING: LIQUID OR COLD GASEOUS OXYGEN
CAN FROSTBITE THE SKIN. OXYGEN WILL RESULT
IN INCREASED FIRE HAZARD.
Caution: Should there be any liquid leak-
age from the stationary unit or Sprint/
Stroller/Hi Flow Stroller separating the
units, set the Sprint/Stroller/Hi Flow
Stroller aside, ensuring it remains verti-
cal, leave the room, and call your health
care provider immediately.