![background image](http://html1.mh-extra.com/html/caire/sprint/sprint_user-manual_3360936010.webp)
10 - ENG PN MN236 A | User Manual
Sprint / Stroller / Hi Flow Stroller
NOTE: If the unit is empty, only the red colored band
of the scale will be exposed. If this is the case, the
unit must be filled prior to use.
7. Under certain environmental conditions, with
continuous use, and especially with the portable
not being moved, it may develop excessive frost
around the vaporizer coil and on the case. You
may reduce this frost by tapping the unit and/or
wiping any accumulated frost off the case.
Condensate Pad
Maintenance
After the unit is empty and has warmed up to
room temperature, remove any moisture from the
condensation cup:
For hard case
• Tilt the unit to one side. Grasp the knob at the
center of the condensation cup (at the bottom
of the unit) and pull straight out. This will
release the cup.
NOTE: If heavily soiled, the pad can be machine
washed (with bleach to disinfect).
• To replace the cup, center it over the round
opening at the bottom of the unit and press
the knob in one click to engage the cup and
then a second click to lock the cup in place.
Knob Cup
NOTE: If the knob will not push in and engage the
cup, hold the cup and pull the knob out until it clicks
into the open position. Now replace the cup as previ-
ously described.
For soft case
• Unzip the bottom zipper and pull back the
bottom cover.
• Remove the pad from the cup and wring out
any absorbed moisture. Allow the pad to dry
completely before replacing it in the cup.
NOTE: If heavily soiled, the pad can be machine
washed (with bleach to disinfect).
• To replace, simply insert pad into bottom
cover and rezip the bottom zipper.
NOTE: If the knob will not push in and engage the
cup, hold the cup and pull the knob out until it clicks
into the open position. Now replace the cup as previ-
ously described.
Frost Reduction
Under certain environmental conditions, with
continuous use, and especially with the portable
not being moved, it may develop excessive frost
around the vaporizer coil and on the case. You may
reduce this frost by tapping the unit and/or wiping
any accumulated frost off the case.
WARNING: DUE TO THE POSSIBILITY OF
EXCESSIVE MOISTURE / ICE BUILD UP IT
IS RECOMMENDED THAT THE HI FLOW
STROLLER REMAIN IDLE FOR 1 HOUR
AFTER USE TO DECREASE MOISTURE
BUILDUP.
Due to the higher flow rates associated with the Hi
Flow Stroller, condensation and some frosting will
occur on the unit, particularly on flow settings of
10 LPM and higher. It is recommended that the unit
be allowed at least 1 hour of inactivity after use to
decrease the possibility of excessive build up due to
continuous usage.