6 - ENG PN MN236 A | User Manual
Sprint / Stroller / Hi Flow Stroller
Quick Disconnect Valve
(QDV) Identification
Portable
Connector
Stationary
Connector
QDV Style
CAIRE
Side Fill
SF
Locking
LIFE-OX
TF
Locking
PENOX
TAEMA
TF
Push-On
PB
Operating Instructions
To Fill the Top Fill Sprint/Stroller/
Hi Flow Stroller
1. Clean the fill connectors on both the stationary
and the Stroller/Spirit/Hi Flow Stroller with a
clean, dry, lint-free cloth.
Caution: The fill connectors must be dry,
because moisture can cause your Sprint/
Stroller/Hi Flow Stroller and stationary
unit to freeze together.
2. Make sure the flow control knobs on both the
Sprint/Stroller/Hi Flow Stroller and reservoir are
in the off (0) position.
3. Position the fill connector in the upright position
over the stationary unit’s connector.
4. a. If your connector is a push-on:
Lower the Sprint/Stroller/Hi Flow Stroller unit
on to the stationary until you feel the connec-
tor engage.
b. If the connector is a Penox or Life-Ox:
Rotate Sprint/Stroller/Hi Flow Stroller until
you feel the connector engage. Then, care-
fully and firmly, rotate the Sprint/Stroller/Hi
Flow Stroller clockwise ( ) while pressing
downward.
NOTE: Continued on step 6 in To Fill the Side Fill
Sprint/Stroller/Hi Flow Stroller.
To Fill the Side Fill Sprint/Stroller/Hi
Flow Stroller
1. Clean the fill connectors on both the stationary
and the Sprint/Stroller/Hi Flow Stroller with a
clean, dry, lint-free cloth.
WARNING: THE FILL CONNECTORS
MUST BE DRY, BECAUSE MOISTURE CAN
CAUSE YOUR SPRINT/STROLLER/HI FLOW
STROLLER AND STATIONARY UNIT TO
FREEZE TOGETHER.