Service Manual
52 | MN260 B
7.8.11.2 Align second Sleeve (9928-SEQ) AND O-RING (9928-
SEQ) over the STRUTS, to the Sleeve leaving the Battery board
exposed.
alignment
ring
Figure 7-89. Second sleeve
7.8.11.3 Attach the Battery Interface Assembly (21494877) to
the Rain Guard by attaching the two screws (9960-15-SEQ).
Torque to 3.5 in-lb.
Figure 7-90. Battery Interface Assembly
7.8.11.4 Connect battery wires to battery bridge board assembly.
Align and attach the Exhaust tube to the Exhaust port on the
Rain Guard.
Figure 7-91. Attach
7.8.11.5 Align the three screws (9914-11-SEQ) of the Battery
Interface Plate (SP9939-1-SEQ ) to the Rain Guard. Torque to 15
in-lb.
Figure 7-92. Align
Summary of Contents for SAROS 4000
Page 56: ...Service Manual 56 MN260 B NOTES ...