![background image](http://html1.mh-extra.com/html/caire/saros-4000/saros-4000_service-manual_3382978030.webp)
Service Manual
30 | MN260 B
7.7.2.8 Disconnect the Breath Detect Tube.
Figure 7-14. Tube Disconnect
7.7.2.9 Remove the Extended Top Cap (Part# SP9756V2-SEQ)
and guide AC Power Cable under the frame of the PCB Assem-
bly. Remove and set aside speaker foam.
Figure 7-15. Inlet Cap Removal
disconnect
Guide
Wires
7.7.3 REMOVE PCB ASSEMBLY
NOTE: Always use ESD Controls when handling the PCB Assembly.
7.7.3.1 Cut zip tie and remove ferrite clamp from Battery Power
Wire.
Figure 7-16. Removal of Ferrite from Battery Power Wire
7.7.3.2 Loosen the Battery Power Wire screws and remove wires.
7.7.3.3 Disconnect the Compressor Thermistor wires.
7.7.3.4 Disconnect the Halls Effect wire.
Summary of Contents for SAROS 4000
Page 56: ...Service Manual 56 MN260 B NOTES ...