Service Manual
28 | MN260 B
7.6.1.5 Remove Fiberglass Sleeve (Part# 21341894) from the
rails
Figure 7-6. Fiberglass Sleeve
Sleeve: 21341894
7.7.2 INLET CAP REMOVAL
NOTE: Use ESD Controls when removing the Inlet Cap.
7.7.2.1 Loosen the four CAPTIVE screws (Part# 9291-SEQ) and
remove the Air Inlet Cover (Part# 9758).
Figure 7-7. Air Inlet Cover Removal
7.7.2.2 Remove and disconnect the 9V Battery (Part# 9257-
SEQ) and the Air Inlet Filter (Part# 9798-SEQ).
Figure 7-8. Filter Screen and 9V Removal
7.7.2.3 Remove three Inlet Cap Mounting screws (Part# 9914-
11-SEQ).
Figure 7-9. Inlet Cap Screw Removal
Captive
Screws
Filter
9V battery
inlet cap
mounting Screws
(NOT CAPTIVE)
Part# 9914-11-SEQ
Summary of Contents for SAROS 4000
Page 56: ...Service Manual 56 MN260 B NOTES ...