Oxygen Concentrator
7
Electromagnetic Compatibility
Medical Electrical Equipment needs special precautions regarding EMC and needs to be installed and put into service according
to the EMC information provided in this manual.
Portable and mobile RF communications equipment can affect Medical Electrical Equipment.
The use of Accessories, transducers, and cables other than those specified, with the exception of transducers and cables sold
by the Manufacturer of this device as replacement parts for internal components, may result in increased Emissions or
decreased Immunity of the Companion 5.
The Companion 5 should not be used adjacent to or stacked with other equipment and that if adjacent or stacked use is
necessary, the Companion 5 should be observed to verify normal operation in the configuration in which it will be used.
Guidance and Manufacturer’s Declaration - electromagnetic emissions
The Companion 5 is intended for use in the electromagnetic environment specified below. The customer or the user
of the Companion 5 should assure that it is used in such an environment.
Emissions Test
Compliance
Electromagnetic environment - guidance
RF
emissions
EN 55011
Group 1
The Companion 5 uses RF energy only for its internal function.
Therefore, its RF emissions are very low and are not likely to
cause any interference in nearby electronic equipment.
RF emissions
EN 55011
Class B
The Companion 5 is suitable for use in all establishments, including
domestic establishments and those directly connected to the public low
- voltage power supply network that supplies buildings used for
domestic purposes.
Harmonic emissions
IEC 61000-3-2
Class A
IEC
Voltage fluctuations/
flicker emissions
61000-3-3
Complies