![background image](http://html1.mh-extra.com/html/caire/companion-1000/companion-1000_technical-manual_3344005072.webp)
Companion 1000/T Liquid Oxygen System Technical Manual
5-24
Service and Repair
"2EV#
stationary. Use a
11
/
16
-in. open-end wrench to loosen the jam nut
3
that holds the
vent valve to the mounting bracket. Remove the vent valve and tube assembly from
the mounting bracket.
3. Use side-cut pliers to cut the wire tie
22
from the warming coil.
4. Use a
7
/
8
-in. open-end wrench to loosen the jam nut
5
(some earlier models may
have a
5
/
8
-in. jam nut) that retains the female adapter to the mounting bracket.
Remove the female fill connector and tube assembly from the mounting bracket.
5.14.2
Installation
Install the cryogenic container by reversing the removal procedure (Section 5.14.1).
5.15
RETURNING THE UNIT FOR SERVICE
To return a product, contact m4at 1-800-TG¢_¢T and ask to speak with
a Technical Support Representative. A Return F4^"m=aF Authorization (RA) number
§addbe issued to track the product return. Please have available your
account number, the
model and serial number
of the product, and the reason for returning the product when
you call to request an RA. Return the unit in its original carton, if possible. If the
original carton is not available, you may purchase a new carton (Section 1.12,
Accessories).
To prevent contaminants from entering the cryogenic container, place the
container in a clean plastic bag and seal tightly.
WARNING
Fire hazard and extreme cold hazard.
Do not package or
ship units that contain liquid or gaseous oxygen. Liquid
oxygen spillage and high oxygen concentrations are possible.
Empty oxygen contents completely before packaging or
shipping units.
Summary of Contents for COMPANION 1000
Page 2: ......
Page 4: ...This page intentionally left blank...
Page 73: ...2EV 6 1 Section 6 PARTS LISTS AND ILLUSTRATIONS...
Page 85: ......