![background image](http://html1.mh-extra.com/html/caire/companion-1000/companion-1000_technical-manual_3344005065.webp)
B-701964-00 Rev. C
Service and Repair
5-17
Companion 1000/T Liquid Oxygen System Technical Manual
Figure 5-24
5.10.3
Inspection
1. Inspect the Kel-F poppet in the cartridge assembly for wear, damage or embedded
contaminants. Replace the cartridge assembly as required.
2. Inspect the lip seal for cracks, wear, or other damage. Replace the lip seal as
required.
3. Inspect the female adapter for cracks or scratches on the tapered seal surface of the
fill tube connector. Replace the female adapter as required.
5.10.4
Service
Service to the fill connector consists of replacing the cartridge assembly
10
, lip seal
12
,
female adapter
4
, and adapter seal
3
.
5.10.5
Reassembly
1. Insert the cartridge assembly
10
into the female fill connector body
11
.
2. Place the larger (lip seal) end of the fill connector flat on a table. Place the stepped
end of the installation sleeve (marked "F") on the smaller (face seal) end of the fill
connector.
3. Place the spiral retainer ring
9
into the open end of the installation sleeve (Figure 5-
25).
Figure 5-25
Cartridge assembly installation requires the use of P/N B-775394-00 female fill
connector installation sleeve (marked "F") and P/N B-775392-00 inner plunger
(marked "I").
Summary of Contents for COMPANION 1000
Page 2: ......
Page 4: ...This page intentionally left blank...
Page 73: ...2EV 6 1 Section 6 PARTS LISTS AND ILLUSTRATIONS...
Page 85: ......