![background image](http://html1.mh-extra.com/html/caire/companion-1000/companion-1000_technical-manual_3344005064.webp)
Companion 1000/T Liquid Oxygen System Technical Manual
5-16
Service and Repair
B-701964-00 Rev. C
5.10.2
Disassembly
1. Hold the female fill connector body
11
with a
11
/
16
-in. open-end wrench placed on
the machined flats. Use an adjustable wrench to remove the female adaptor
4
(Figure 5-21).
Figure 5-21
2. Remove the seal
3
from the female adapter (Figure 5-22).
Figure 5-22
3. Hold the female fill connector body
11
with a
11
/
16
-in. open-end wrench placed on
the machined flats. Use an adjustable wrench to remove the lip seal retainer sleeve
13
. Pull the lip seal
12
out of the female quick connect body.
4. Use a small screwdriver or awl to remove the spiral retainer ring
9
by first carefully
lifting the beveled edge of the retainer over the lip of the retaining ring groove
(Figure 5-23).
Figure 5-23
5. Carefully pry the rest of the ring over the lip until the entire ring pops out.
6. Remove the cartridge assembly
10
(Figure 5-24).
The stepped (spring) end of the lip seal fits into the corresponding recess in the
female quick connect body.
Summary of Contents for COMPANION 1000
Page 2: ......
Page 4: ...This page intentionally left blank...
Page 73: ...2EV 6 1 Section 6 PARTS LISTS AND ILLUSTRATIONS...
Page 85: ......