PROGRAMMING THE QUANTITY OF BEVERAGE IN A CUP
ON
Switch the
machine on
using the
On/
Off Switch
.
Wait about 1
min for machine
to warm up.
1.
Insert the
capsule, pressing
it gently into
place.
Place a cup or
mug under the
coffee dispensing
spout.
On reaching the
desired amount
of beverage,
release the
button.
Now the button is
programmed
to your desired
amount.
Raise the
lever to open
the capsule
compartment.
Close the lever
fully.
6.
NOTE:
The quantity of coffee dispensed may be programmed,
from a minimum of 30ml to a maximum of 250ml
.
NOTE:
Recommended Programming/Factory Programming:
- 30ml: Single Espresso Shot
- 60ml: Double Espresso Shot
- 120ml: Tea (& Hot Water Button)
*Quantities are approximate and may vary slightly between capsules.
10.
2.
3.
4.
5.
Press and release
the button
corresponding
to the type of
beverage you want
as per
Diagram 3
on Page 7.
8.
7.
