DISPENSING BEVERAGES - Using Factory Settings
MAINTENANCE TIP:
Between uses, to ensure optimum product delivery, remove
used capsule from machine and rinse by pressing any button.
NOTE:
The quantity of beverage dispensed can be programmed according to
personal taste and the size of the cups or mugs used. Please refer to chapter
“Programming the quantity of beverage in a cup” on
Page 10
.
8.
Raise the lever
to eject the used
capsule into the
drawer.
Close the lever.
Insert the
capsule, pressing
it gently into
place.
Close the lever
fully and place
a cup or mug
under the coffee
dispensing spout.
Raise the lever to
open the capsule
compartment.
Switch the
machine on
using the
On/
Off Switch
.
Wait about 1
min for machine
to warm up.
Press and release
the button
corresponding
to the type of
beverage you want
as per
Diagram 3
on Page 7.
5.
The selected
beverage button will
blink and machine
will stop dispensing
on reaching the
programmed
quantity and emit
a beep.
6.
ON
7.
8.
4.
3.
2.
1.
