![background image](http://html1.mh-extra.com/html/cafe-0/chs900m/chs900m_owners-manual_3360060008.webp)
8
49-2000387 Rev. 4
Surface Units (Cont.)
How To Synchronize Left Elements
The
Sync Burners
feature is only intended for cookware
that completely spans both burners.
To Turn On
Hold the
Sync Burners
pad for about half a second to
connect the two elements. Operate either element as
described in Operating the Cooktop Elements to adjust
power level.
To Turn Off
1. Touch the
On/Off
pad on either element to turn off the
Sync Burners.
or
2. Touch the
Sync Burners
to turn both elements off.
USING THE RANGE:
Surface
Units
/
Precision
Cooking
Precision Cooking
The Precision Cooking feature allows precise
temperature control for improved results. This feature
may be used with the Precision Cooktop Sensor on
the front left burner or with compatible Bluetooth paired
cooking devices on any burner. Only one burner may
operate in precision cook mode at a time.
Pairing a Bluetooth
®
Device
To pair a Bluetooth device, refer to Settings section.
Using the Warming Zone
WARNING
FOOD POISON HAZARD:
Bacteria may grow in food at
temperatures below 140°F.
■
Always start with hot food. Do not use warm setting to
heat cold food.
■
Do not use warm setting for more than 2 hours.
The
WARMING ZONE
, located in the back center of
the glass surface, will keep hot, cooked food at serving
temperature. Always start with hot food. Do not use to
heat cold food. Placing uncooked or cold food on the
WARMING ZONE
could result in foodborne illness.
To use the WARMING ZONE:
Press the
WARMING ZONE
pad, select the desired level
(1, 2 or 3) using the number pads, and press start.
To turn off the WARMING ZONE:
Press the
WARMING ZONE
pad.
NOTE:
Cancel/Off will NOT turn off the warming zone.
For best results, all foods on the
WARMING ZONE
should be covered with a lid or aluminum foil. When
warming pastries or breads, the cover should be vented
to allow moisture to escape.
The initial temperature, type and amount of food, type of
pan, and the time held will affect the quality of the food.
Always use pot holders or oven mitts when removing
food from the
WARMING ZONE
, since cookware and
plates will be hot.
NOTE:
The surface warmer will not glow red.