31-2000815 Rev. 0
19
INSTALL COVER PANELS
See alternate method if side access is blocked .
■ Hold the bottom cover over the bottom support
while driving one screw (provided) into each side .
■ Place the top cover with shelf over the top wall
support. If you have access to the sides, secure the
panel with two screws on each side .
■ Secure the top cover with shelf to the top support
with screws through the front of the panel, at the top
corners . Use one screw on each side .
INSTALL COVER PANELS (cont.)
ALTERNATE METHOD: When side access is blocked
■ Install bottom cover over the bottom support while
driving one screw into each side .
■ Hold top cover in place while marking screw locations,
just below shelf support and onto bottom cover .
■ Remove the shelf and drill a 9/64” diameter hole in
the pencil-marked locations .
■ Mount the top cover over the top support and
secure the front cover with screws through the
drilled holes on each side .
■ Install screws through each top corner.
Mark Screw
Locations for
Alternate Method
ACCESSORIES—30” TO 36” ADJUSTABLE BACKSPLASH (not included) (Cont.)
UXADBS36PSS, UXADBS48PSS Accessory Installation
Install
Screw
Cover Panel
Install
Screw
Install Corner Screws
Install Screw
on Each Side
Shelf
Install Screw in Top Corner on Each Side
