![background image](http://html1.mh-extra.com/html/cafe-0/c2y366/c2y366_installation-instructions-manual_3302535017.webp)
31-2000815 Rev. 0
17
OPTIONAL ACCESSORIES—12” HIGH BACKSPLASH
UX12BS36PSS, UX12BS48PSS Accessory Installation
This kit provides for the installation of a 12” high
backsplash for 36” Professional Ranges and Rangetops .
TOOLS AND MATERIALS REQUIRED
■ Gloves to protect against sharp edges
■ T-15 and #2 Phillips
screwdrivers
■ Drill with 3/32” and
9/64” bits
■ Safety glasses
■ Level
■ Pencil
This Kit Includes
■ Wall support panel
■ Cover panel
■ Hardware package with
– 5 Stainless Steel Torx 15
#8 self-tapping screws
– 5 Phillips #2 pan head wood
#10 screws
INSTALL 12” BACKSPLASH
WARNING
This backsplash must be securely
fastened to the wall . Failure to do so could result in
damage or personal injury .
■ Install and level the range or rangetop and the
range hood according to the installation instructions .
■ Remove the backsplash packaging and protective
film .
■ Use a level to pencil a horizontal line on the wall, 1/8”
above the range or rangetop. The 1/8” gap allows the
cover panel to overlap the wall support panel .
■ Locate wall studs on each side. Where studs are not
available, plan to use wall anchors (not provided).
■ Align the wall support panel on the marked
horizontal line and centered left to right .
■ The wall support panel must be secured to the wall
at all 4 corners . Use wood screws (provided) or wall
anchors (not provided) to secure the support panel
to the wall .
■ Place the cover panel over the wall support panel
and secure with Torx screws (provided). Install 2
screws on each side .
Wall Support Panel
Cover Panel
Hardware
Package
761Dia65
Install 4 Wood Screws
Install T-15
Screws
Wall
Support
Panel
Wall Support
Panel
Cover Panel
Center
Arrow
1/8”