CAENels DAMC-FMC2ZUP, User Manual

Page: 31 / 34

DAMC-FMC2ZUP User’s Manual Appendix
31
3V3 is connected to the board local 3.3V supply rail and can be used to power an
external SFP/SFP+ module.
The pin assignments are listed in the following table:
Name Component Pin # Bank
Voltage Notes
TRIGGER_1_N Main FPGA F20 FMC1 Vadj
TRIGGER_1_P Main FPGA E20 FMC1 Vadj
TRIGGER_0_P Main FPGA D19 FMC1 Vadj
TRIGGER_0_N Main FPGA C19 FMC1 Vadj
SFP_TX_P Main FPGA U6 AC-coupled
SFP_TX_N Main FPGA U5 AC-coupled
SFP_RX_P Main FPGA V4 AC-coupled
SFP_RX_N Main FPGA V3 AC-coupled
CLK_IN_P Si5341A @ 0x77 In1 AC-coupled
CLK_IN_N Si5341A @ 0x77 In1b AC-coupled
SCL Main FPGA E9 3.3V 10k pull-up
SDA Main FPGA F9 3.3V 10k pull-up
Figure 5-4: High Density microHDMI Pin Assignments