DAMC-FMC2ZUP User’s Manual
Front Panel Available Features
27
4.1
microUSB Front-panel Connector
The microUSB front panel connector allows access to:
•
MMC Stamp and
•
Main FPGA PS
consoles from an external PC.
On Windows™ systems, when an USB cable is connected to this interface, 2 new
COM peripherals will be detected. To identify the number associated to these
peripherals refer to the "Device Manager Tool" provided by the Windows™ OS.
On Linux based operating systems, when an USB cable is connected to this
interface, 2 new devices will appear into the
/dev/
folder, usually they are identified
as "
tty
" devices. Monitoring the output of the
dmesg
command upon connection of
the board might help to identify the proper device names.
The consoles can be accessed with tools like Putty or minicom with the following
configuration:
Configuration
Value
Baudrate
115200
Data bits
8
Stop bits
1
Parity
None
Flow control
None
Figure 4-2:
MMC UART configuration
Configuration
Value
Baudrate
115200
Data bits
8
Stop bits
1
Parity
None
Flow control
XON/XOFF
Figure 4-3:
MAIN FPGA UART configuration
Summary of Contents for DAMC-FMC2ZUP
Page 14: ...DAMC FMC2ZUP User s Manual DAMC FMC2ZUP Architecture 14 Figure 2 1 Block Diagram...
Page 19: ...DAMC FMC2ZUP User s Manual DAMC FMC2ZUP Architecture 19 Figure 2 2 Clock Network Diagram...
Page 33: ...DAMC FMC2ZUP User s Manual Appendix 33 Figure 5 6 FMC connections...
Page 34: ...DAMC FMC2ZUP User s Manual Appendix 34 Figure 5 7 FMC connections...
