Document type:
Title:
Revision date:
Revision:
Installation Guide (MUT)
Mod. SY1527, universal multichannel power supply system
03/12/02
3
NPO:
Filename:
Number of pages:
Page:
00103/97:1527x.MUTx/03 HWGUIDE_REV3.DOC
62
55
7.3.2
Remote operation via Terminal
Remote Operation via Terminal
is intended as the interactive control and monitoring of
one or more SY1527 systems by using a remote terminal. The remote operation via
terminal can be performed in different ways, according to the interface used to
communicate with the system. Nominally, it can be achieved by:
•
Using the RS232 interface to connect one SY1527 system to a VT100-like terminal or
to a standard PC running a terminal emulator program;
•
Using the H.S. CAENET interface to daisy-chain two or more SY1527 systems and
then controlling them from a VT100-like terminal via the RS232 interface (
Multicrate
Operation
);
•
Using the TCP/IP protocol via Ethernet to perform a Telnet connection.
The different hardware configurations which can be arranged for the Remote Operation
via Terminal are summarised in Fig. 7.2.
Refer to § 7.4.1, p.56 for details about cabling requirements in the different hardware set-
ups. For further details on the operating mode please refer to the
User’s Manual
.
RS2
32
H
.S
. C
A
E
N
E
T
Video Terminal
(ANSI VT100 or compatible;
otherwise standard PC
running a terminal emulator
program)
1 2 3
4
4 5 6
7 8 9
.
0 -
CM
D
DEL ACK
+
SY1527 crate configured as
CAENET controller and connected
to a terminal via RS232
(MULTICRATE OPERATION)
TE
LN
E
T c
on
ne
cti
on
v
ia
E
th
er
ne
t
+
+
TCP/IP Network (INTERNET/INTRANET)
SY1527 crate
1
2
3
4
4
5
6
7
8
9
.
0
-
CMD
DEL
ACK
Fig. 7.2 – Remote Operation via Terminal
