Document type:
Title:
Revision date:
Revision:
Installation Guide (MUT)
Mod. SY1527, universal multichannel power supply system
03/12/02
3
NPO:
Filename:
Number of pages:
Page:
00103/97:1527x.MUTx/03 HWGUIDE_REV3.DOC
62
53
7.1.3
Connecting the system to the mains
A Power Supply cable is provided with the system to connect it to the mains.
To connect the system to the mains, follow this procedure:
1. plug the cable into the relevant connector on the rear panel and tighten the relevant
connector screws (see Fig. 3.6, p.35);
2. insert the plug into the mains (Monophase: 100
÷
230 V a.c., 50
÷
60 Hz;
3400 W).
7.2 Hardware
settings
No hardware setting are required on the SY1527 system.
Conversely, some hardware settings may be required on the boards to be installed in the
SY1527 crate and particularly the adjustment of the VMAX HARDWARE via the relevant
trimmer. Please refer to the
User’s Manual
of the board for details.
