REGUL8OR – User’s Manual
41
2.10
Trigger and Analog Control Inputs
The isolated Analog Input connector can accept a voltage value in range of -10
V to +10 V and it can be used to control the REGUL8OR from an external voltage
source in order to take advantage of the digital control loop. The isolated BNC
connector is presented in the figure below (
).
Figure 16:
Analog Input and Trigger connectors
The isolated Trigger Input (also on a BNC connector) can accept a voltage
ranging from 0 V to +5 V and it can be used as a start/update signal for the REGUL8OR
as explained in the dedicated sections.
Do not apply voltage greater than + 10 V (or lower than -10
V) on the analog input connector, this can cause damages to
the internal parts.
Do not apply a voltage greater than + 5 V (or lower than 0
V) on the trigger input connector, this can cause damages to
the internal parts.
CAUTION
