FAST-PS-M – User’s Manual
34
4.2
Display
The colour display on the FAST-PS-M power supply unit allows users to
visualize information about the power supply status and to control the unit in order to
use it locally. Screens and pages of the display can be navigated from the navigation
switch though user friendly menus and sub-menus.
Power-up
The FAST-PS-M, upon power-up or power-cycling, will display an empty screen
until the unit embedded OS is initialized.
Please note that this procedure will take approximately 25-seconds before
the Home Screen is displayed.
Home Screen
The FAST-PS-M home screen is the first loaded page upon power-up or power-
cycling of the module, it is shown in
Figure 17
, and contains information on:
•
the FAST-PS-M model;
•
the module IP address;
•
output current readback value [A] with the light blue status bar;
•
output voltage readback value [V] with the green status bar;
•
the status of the output – i.e. ON or OFF;
•
the status of the control – i.e. Local or Remote;
•
the module Identification Name;
•
the regulation mode of the unit – i.e. constant-current or constant-voltage.
Figure 17: Home Screen
The Home screen presents some indications on the right side as:
•
ON – OFF
: shows if the power supply output is enabled or not;
•
REM – LOC – FCI
: shows if the module is in Local, Remote or Fast Control
Interface control mode;
•
C.C. – C.V.
: shows if the module is working in C.C. or in C.V. regulation mode.