Using LucinaAR
32
©2019 CAE 905K472052 v2.1
CAE
LucinaAR
You automaticaly receive the position of the instructor’s holograms.
If you are satisfied with the positon of the instructor’s holograms, simply wait for the
instructor to start the chapter.
Holgram Sharing Screen
If you feel the need to recalibrate the holograms to the desired position, you can stop
receiving the instructor’s holograms and proceed with manual calibration, as done in
Single mode.
d. Once you are done calibrating, air tap
Done
to join the simulation.
End the Simulation
To end a LucinaAR simulation with the HoloLens:
1. Use the bloom gesture to return to the LucinaAR Start menu.
2. Tap the
Remove
icon in the upper right corner of the LucinaAR Startup window to exit
LucinaAR and close the window.
3. Glance around the environment and verify that all virtual windows have been closed.
