©2019 CAE 905K472052 v2.1
29
Using LucinaAR
In Experience Chapter controls are as follows:
In Experience Chapter Controls
Multi-User
Instructor
1. Visualize the 4 corners of the Fitbox and tap to continue
2. On the
Select your experience
menu:
a. Tap
Multi-User Instructor
.
b. Tap
Physical Manikin
.
c. To start the calibration, select the same SCE that was selected in Müse.
3. Perform the calibration as it’s done in single user mode.
4. When the simulation starts, wait for the other user clients before changing chapters. The
clients will follow chapter changes selected by the host. Controls will be as explained in
single mode.
Learner
1. Visualize the four corners of the Fitbox and tap to
Continue
.
2. On the
Select your experience
menu:
a. Tap
Physical
Manikin
.
b. To start the calibration, tap
Start
.
3. Perform the calibration as it is done in single mode. Once the simulation starts, you will
see the menu shown below:
Client Simulation Menu
