Setup
22
©2019 CAE 905K472052 v2.1
CAE
LucinaAR
Configure the Start Menu
HoloLens operating system updates may alter your Start menu configuration.
Start Menu
If this is the case, you can unpin or pin applications to your Start menu by selecting the application
with air tap along with gaze until the Unpin or Pin options appear, respectively. Select the Unpin or
Pin options with one of the following methods:
º
Use air tap along with gaze.
º
Use gaze and follow the voice command prompt by saying “Unpin” or “Pin” when they
appear at the bottom of the Unpin or Pin options, respectively.
IMPORTANT:
Be careful not to select the Uninstall option when unpinning an application.
Setup Lucina with Müse
To setup Lucina with Müse:
1. Connect the router to Lucina using the Ethernet port on Lucina’s side.
2. In Müse, start one of the augmented reality supported SCEs:
Shoulder Dystocia
,
A
Normal Delivery
or
A Vaginal Breech Delivery
.
3. Place baby on Home position, as specified by the selected SCE in Müse.
4. Optional: Set
Rate
of
descent
to max (15).
5. Optional: Set
Contraction
Frequency
to max (7).
Note:
Keep the delivery at Pause. The HoloLens will automatically Play the simulation
when needed.
