www.cadis.be | [email protected]
Water at the heart of our technology
Configuration of Channel 1 or Channel 2
Name:
enter a name or location for the leak detection cable.
Active
: remove the check mark if a channel is not used or if a detection cable has not been connected.
Map Upload:
select the PDF plan of the channel. This plan is then loaded into the module and can be retrieved via
the Home page.
Service level
: select the sensitivity for the detection cable.
Unit
: select the unit “Metres” or “Feet”.
Zone Configuration:
the detection cable can be divided into 10 detection zones, enter the start and end value and
name for the detection zones.
Alarm Action Definition
: select the additional action to be activated in the event of a specific alarm.
Additional configuration of the wireless sensors:
