www.cadis.be | [email protected]
Water at the heart of our technology
Connecting and Adjusting the IP-address :
In order to open the webpage of the AQUAVISION 2DETECT, it needs to be accessed from a computer ranging
in the same array of IP-addresses as the AQUAVISION 2DETECT.
Establishing the communication is possible in the following way :
Use a network cable to connect the computer of laptop with the AQUAVISION 2DETECT.
Adjust the IP-address of the computer via “Network Centre”, which you can access through the screen
“Configuration”.
Click on "Proporties"
Select "Internet Protocol issue 4 (TCP/IPv4)
Click on "Properties"
Select “Use the following IP-address” and enter the IP-address and the sub net mask.
Click on “OK”.
Click on “Close”.
The computer will now use IP-address 10.100.100.220 as default.
Connect the network cable between the computer and the
AQUAVISION 2DETECT
.
Enter the IP-address in the web browser and the web page of the
AQUAVISION 2DETECT
.
will open.
