Cadillac STS 2011 Owner'S Manual Download

Page: 19 / 529

Black plate (12,1)

Cadillac STS Owner Manual - 2011

Steering Wheel Adjustment

The power tilt and telescope wheel control is located on
the left side of the steering column.

To adjust the steering wheel:

Push the control up or down to tilt the steering
wheel up or down.

Push the control forward or rearward to move the
steering wheel towards the front or rear of the
vehicle.

See

Power Tilt Wheel and Telescopic Steering Column

on page 4

‑

Interior Lighting

Reading Lamps

The reading lamps are located on the overhead
console. These lamps come on automatically when any
door is opened.

For manual operation, press the button next to each
lamp to turn it on or off.

If the reading lamps are left on, they automatically shut
off 10 minutes after the ignition has been turned off.

For more information on interior lamps, see:

Reading Lamps on page 4

‑

Entry Lighting on page 4

‑

Instrument Panel Brightness on page 4

‑

1-12

Summary of Contents for STS 2011


















































































































































































































































































































































































































































































































































Search results

Summary of Contents for STS 2011

Reviews:

Related manuals for STS 2011

Brands by name

Popular brands

Cadillac STS 2011, Owner'S Manual

Search results

Summary of Contents for STS 2011

Reviews:

Related manuals for STS 2011

Brands by name

Popular brands