Cadillac STS 2011 Owner'S Manual Download Page 191

Page: 191 / 529

Black plate (4,1)

Cadillac STS Owner Manual - 2011

Heated Steering Wheel

For vehicles with a heated steering wheel, the button for
this feature is located on the steering wheel.

(

Press to turn the heated steering wheel on or off.

A light on the button displays when the feature is
turned on.

The steering wheel takes about three minutes to start
heating.

Turn Signal/Multifunction Lever

The lever on the left side of the steering column
includes the following:

Turn and Lane-Change Signals

Headlamps

Headlamp High/Low-Beam Changer

Fog Lamps

Cruise Control

Adaptive Cruise Control (If Equipped).

Forward Collision Alert (FCA) (If Equipped).

Flash-To-Pass Feature.

Information for these features is on the pages following.

Turn and Lane-Change Signals

An arrow on the
instrument panel cluster
flashes in the direction of
the turn or lane change.

Move the lever all the way up or down to signal a turn.

Raise or lower the lever until the arrow starts to flash to
signal a lane change. Hold it briefly until the lane
change is complete.

4-4

Summary of Contents for STS 2011


















































































































































































































































































































































































































































































































































Search results

Summary of Contents for STS 2011

Reviews:

Related manuals for STS 2011

Brands by name

Popular brands

Cadillac STS 2011, Owner'S Manual

Search results

Summary of Contents for STS 2011

Reviews:

Related manuals for STS 2011

Brands by name

Popular brands