Cadillac STS 2011 Owner'S Manual Download

Page: 14 / 529

Black plate (7,1)

Cadillac STS Owner Manual - 2011

Seat Adjustment

Power Seats

The power seat controls
are on the outboard side
of the seat(s).

Move the seat forward or rearward by moving the
control (A) forward or rearward.

Raise or lower the front or rear of the seat cushion by
moving the front or rear of the control (A) up or down.

See

Power Seats on page 2

‑

Power Reclining Seatbacks

The control is located on the outboard side of the
seat(s).

To raise or recline the seatback, tilt the top of the
control (B) forward or rearward.

See

Power Reclining Seatbacks on page 2

‑

Power Lumbar Adjustment

The control is located on
the outboard side of the
front seat(s).

Press the front or rear of the control to increase or
decrease lumbar support.

Press the top or bottom of the control to raise or lower
the position of the lumbar support.

See

Power Lumbar on page 2

‑

1-7

Summary of Contents for STS 2011


















































































































































































































































































































































































































































































































































Search results

Summary of Contents for STS 2011

Reviews:

Related manuals for STS 2011

Brands by name

Popular brands

Cadillac STS 2011, Owner'S Manual

Search results

Summary of Contents for STS 2011

Reviews:

Related manuals for STS 2011

Brands by name

Popular brands