Black plate (31,1)
Cadillac SRX Owner Manual (Include Mex) - 2012
Vehicle Care
10-31
For the vehicle equipped with an
up-level headlamp (HID), there
will be two vertical headlamp
adjusters for V1 and V2 (A).
Some vehicles have
funnel-shaped caps on the
adjusters for easier access of
a Number 2 Phillips screwdriver
to turn the adjusters.
8. For the base vehicle, turn the
vertical adjuster (V1) until the
headlamp beam is aimed to
the horizontal tape line. Turn it
clockwise or counterclockwise
to raise or lower the angle of
the beam.
For the up-level vehicle, turn the
vertical adjusters (V1 and V2)
simultaneously until the
headlamp beam is aimed to the
horizontal tape line. Turn them
clockwise or counterclockwise
to raise or lower the angle of
the beam.
9. Make sure that the light from
the headlamp is positioned
at the bottom edge of the
horizontal tape line. The lamp
on the left (A) shows the correct
headlamp aim. The lamp on the
right (B) shows the incorrect
headlamp aim.
10. Repeat Steps 7
–
9 for the
opposite headlamp.