Cadillac SRX 2012 Owner'S Manual Download Page 391

Page: 391 / 512

Black plate (51,1)

Cadillac SRX Owner Manual (Include Mex) - 2012

Vehicle Care

10-51

(G) Maximum Cold Inflation

Load Limit

Maximum load

that can be carried and the
maximum pressure needed

to support that load.

Compact Spare Tire Example

(A) Tire Ply Material

The type

of cord and number of plies in

the sidewall and under the tread.

(B) Temporary Use Only

The compact spare tire or

temporary use tire has a
tread life of approximately

5 000 km (3,000 mi) and

should not be driven at speeds
over 105 km/h (65 mph).

The compact spare tire is for

emergency use when a regular

road tire has lost air and gone
flat. If the vehicle has a compact

spare tire, see

and

Goes Flat on page 10

�

(C) Tire Identification Number

(TIN)

The letters and numbers

following the DOT (Department

of Transportation) code are the

Tire Identification Number (TIN).

The TIN shows the

manufacturer and plant

code, tire size, and date the
tire was manufactured. The TIN

is molded onto both sides of the

tire, although only one side may
have the date of manufacture.

(D) Maximum Cold Inflation

Load Limit

Maximum load

that can be carried and the
maximum pressure needed

to support that load.

(E) Tire Inflation

The

temporary use tire or compact

spare tire should be inflated

to 420 kPa (60 psi). For more
information on tire pressure and

inflation see

Tire Pressure on

page 10

�

Summary of Contents for SRX 2012

































































































































































































































































































































































































































































































































Search results

Summary of Contents for SRX 2012

Reviews:

Related manuals for SRX 2012

Brands by name

Popular brands

Cadillac SRX 2012, Owner'S Manual

Search results

Summary of Contents for SRX 2012

Reviews:

Related manuals for SRX 2012

Brands by name

Popular brands