Black plate (8,1)
Cadillac SRX Owner Manual (Include Mex) - 2012
3-8
Seats and Restraints
The vehicle will also automatically
save driver seat, outside mirror,
and adjustable throttle and brake
pedal positions to the current driver
Remote Keyless Entry (RKE)
transmitter when the ignition is
turned off. These automatically
stored positions are referred to
as RKE Memory positions.
See
Storing Button Memory Positions
To save positions into Button
Memory:
1. Adjust the driver seat,
seatback recliner, both outside
mirrors, and adjustable pedals,
if available, to the desired driving
positions.
2. Press and hold MEM (Memory)
and
“
1
”
at the same time until a
beep sounds.
3. Repeat Steps 1 and 2 for a
second driver using
“
2.
”
Recalling Button Memory
Positions
To recall the manually saved
Button Memory positions, press
and hold
“
1
”
or
“
2.
”
The driver seat,
outside mirrors, and adjustable
pedals, if available, move to the
positions stored to those buttons
when pressed. Releasing
“
1
”
or
“
2
”
before the stored positions are
reached stops the recall.
If something has blocked the
driver seat and/or the adjustable
pedals, if available, while recalling
a memory position, the recall may
stop. Remove the obstruction;
then press and hold the appropriate
manual control for the memory item
that is not recalling for two seconds.
Try recalling the memory position
again by pressing the appropriate
memory button. If the memory
position is still not recalling,
see your dealer for service.
Recalling RKE Memory Positions
(Memory Remote Recall)
The Memory Remote Recall feature
can recall the driver seat, outside
mirrors, and adjustable pedals,
if available, to previously stored
RKE Memory positions when
entering the vehicle.
Every time the ignition is placed
in OFF, the positions of the
driver seat, outside mirrors, and
adjustable pedals, if available, are
automatically stored to the RKE
transmitter that was used to start
the vehicle. These positions are
called RKE Memory positions and
may be different than the previously
mentioned Button Memory positions
saved to the
“
1
”
or
“
2
”
buttons.
