Cadillac SRX 2012 Owner'S Manual Download Page 289

Page: 289 / 512

Black plate (11,1)

Cadillac SRX Owner Manual (Include Mex) - 2012

Driving and Operating

9-11

{

WARNING

Do not load the vehicle

any heavier than the

Gross Vehicle Weight
Rating (GVWR), or either the

maximum front or rear Gross

Axle Weight Rating (GAWR).
This can cause systems to

break and change the way the

vehicle handles. This could
cause loss of control and a

crash. Overloading can also

shorten the life of the vehicle.

Tire and Loading Information

Label

Label Example

A vehicle-specific Tire and

Loading Information label is

attached to the vehicle's center
pillar (B-pillar). With the driver

door open, the label is attached

near the door lock post. The Tire

and Loading Information label
shows the number of occupant

seating positions (A), and the

maximum vehicle capacity

weight (B) in kilograms and
pounds.
The Tire and Loading

Information label also shows
the tire size of the original

equipment tires (C) and the

recommended cold tire inflation

pressures (D). For more
information on tires and inflation

see

Tires on page 10

�

and

Tire Pressure on page 10

�

There is also important loading

information on the Certification

label. It tells you the Gross
Vehicle Weight Rating (GVWR)

and the Gross Axle Weight

Rating (GAWR) for the front and

rear axle. See

“

Certification

Label

”

later in this section.

Summary of Contents for SRX 2012

































































































































































































































































































































































































































































































































Search results

Summary of Contents for SRX 2012

Reviews:

Related manuals for SRX 2012

Brands by name

Popular brands

Cadillac SRX 2012, Owner'S Manual

Search results

Summary of Contents for SRX 2012

Reviews:

Related manuals for SRX 2012

Brands by name

Popular brands