Cadillac ESCALADE ESV 2004 Manual Download Page 27

Page: 27 / 92

Press the multi-function
button next to the Zoom In
prompt to get a closer
look at the currently
displayed map.

Press the multi-function
button next to the Zoom
Out prompt to see a larger
scale of the currently
displayed map.

You can also view your highlighted route, waypoints if
any have been set or the vehicle trail if you have turned
the tracking feature on.

If you zoom out of the currently displayed map and the
tracking feature is on, you will not be able to view
the trail of your vehicle on the larger scale map. See
Navigation Menu on page 2-10 for more information.

This multi-function button
allows you to view a list of
all points of interest
close to the area in which
you are traveling.

This multi-function button
takes you to the Enter
Dest (Destination) screen.

This multi-function button
allows you to view a list of
the last 10 destinations
to which you have traveled.

2-5

Summary of Contents for ESCALADE ESV 2004





























































































Search results

Summary of Contents for ESCALADE ESV 2004

Reviews:

Related manuals for ESCALADE ESV 2004

Brands by name

Popular brands

Cadillac ESCALADE ESV 2004, Manual

Search results

Summary of Contents for ESCALADE ESV 2004

Reviews:

Related manuals for ESCALADE ESV 2004

Brands by name

Popular brands