The following multi-function buttons are available in the
New Entry screen:
Receive: If you want to transfer information stored in a
Palm hand-held computing device, press the Receive
multi-function button. The Beam screen will be
displayed, and you will be prompted to transfer the data.
See the “Enter Destination” portion under
Navigation
Menu on page 2-10 for more information.
Edit: If you want to edit previously stored information,
you can use the Edit multi-function button. Use the
following steps to edit information stored in the
address book:
1. Perform Steps 1 through 3 for accessing
stored information listed previously under
“Address Book.”
2. Scroll to the area you want to edit and press the
TUNE/SEL knob to bring up the alpha-numeric
keypad.
3. Press the Done and then the Back multi-function
buttons to exit the Edit menu.
Delete All
If you select Delete All from the Address Book screen,
the system will ask you if you want to delete all the
stored information in the address book. If you press and
hold the Yes multi-function button until it beeps, all
stored information will be deleted from the Address
Book. If you press the No multi-function button, you will
return to the Address Book screen and the information
will not be deleted.
Back
Z
Press this multi-function button to return you to the
previous screen.
Setup
The Setup Menu is used to adjust the basic features of
the system to your preference. See “Setup Menu”
later in this section for more information.
Feat Prog (Feature Programming)
The Feature Programming menu is where you can
customize the programmable features on your vehicle to
your preferences. For more information, see “DIC
Vehicle Personalization” in the Instrument Panel section
of your CTS owner’s manual.
1-11
