Cadillac Escalade 2016 Owner'S Manual Download Page 163

Page: 163 / 397

Cadillac Escalade Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-

9159314) - 2016 - crc - 6/25/15

162

Instruments and Controls

Remote Door Unlock

This allows selection of which doors
will unlock when pressing

on the

RKE transmitter.

Select All Doors or Driver Door.

Remote Start Auto Cool Seats

If equipped and turned on, this
feature will turn the cooled seats on
when using remote start on
warm days.

Select Off or On.

Remote Start Auto Heat Seats

If equipped and turned on, this
feature will turn the heated seats on
when using remote start on
cold days.

Select Off or On.

Remote Window Operation

This allows the window to be
opened when pressing

on the

RKE transmitter. See

Remote

Keyless Entry (RKE) System
Operation

Select Off or On.

Passive Door Unlock

This allows the selection of what
doors will unlock when using the
button on the driver door to unlock
the vehicle.

Select All Doors or Driver Door.

Passive Door Lock

This allows passive locking to be
turned on or off and selects
feedback. See

Remote Keyless

Entry (RKE) System Operation

Select Off, On with Horn
Chirp, or On.

Remote Left in Vehicle Alert

This feature sounds an alert when
the RKE transmitter is left in the
vehicle.

Select Off or On.

Bluetooth

Select and the following may
display:

Pair New Device

Device Management

Ringtones

Voice Mail Numbers

Pair New Device

Select to pair a new device. See

“

Pairing

”

under

“

Bluetooth

(Infotainment Controls)

”

in the

infotainment manual.

Device Management

Select to connect to a different
phone source, disconnect a phone,
or delete a phone.

Ringtones

Press to change the ring tone for
the specific phone. The phone does
not need to be connected to change
the ring tone.

Voice Mail Numbers

This feature displays the voice mail
number for all connected phones.
To change the voice mail number,
select EDIT or press the EDIT
button. Type a new number, then
select SAVE or press the SAVE
button.

Summary of Contents for Escalade 2016














































































































































































































































































































































































































Search results

Summary of Contents for Escalade 2016

Reviews:

Related manuals for Escalade 2016

Brands by name

Popular brands

Cadillac Escalade 2016, Owner'S Manual

Search results

Summary of Contents for Escalade 2016

Reviews:

Related manuals for Escalade 2016

Brands by name

Popular brands