Cadillac Escalade 2016 Owner'S Manual Download Page 12

Page: 12 / 397

Cadillac Escalade Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-

9159314) - 2016 - crc - 6/25/15

In Brief

If equipped, the front and rear
windows have an express-down
feature. The front windows have an
express-up feature. See

Windows

and

Power Windows

Seat Adjustment

Power Seats

To adjust the seat:

Move the seat forward or
rearward by sliding the control
forward or rearward.

Raise or lower the front part of
the seat cushion by moving the
front of the control up or down.

Raise or lower the seat by
moving the rear of the control up
or down.

See

Power Seat Adjustment

Lumbar Adjustment

To adjust the lumbar support:

Press and hold the control
forward to increase or rearward
to decrease upper and lower
lumbar support at the same time.

Press and hold the control up to
increase upper lumbar support
and decrease lower lumbar
support.

Press and hold the control down
to increase lower lumbar support
and decrease upper lumbar
support.

See

Lumbar Adjustment

Reclining Seatbacks

To recline the seatback:

Tilt the top of the control
rearward to recline.

Tilt the top of the control forward
to raise.

See

Reclining Seatbacks

Summary of Contents for Escalade 2016














































































































































































































































































































































































































Search results

Summary of Contents for Escalade 2016

Reviews:

Related manuals for Escalade 2016

Brands by name

Popular brands

Cadillac Escalade 2016, Owner'S Manual

Search results

Summary of Contents for Escalade 2016

Reviews:

Related manuals for Escalade 2016

Brands by name

Popular brands