Cadillac Escalade 2016 Owner'S Manual Download Page 29

Page: 29 / 397

Cadillac Escalade Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-

9159314) - 2016 - crc - 6/25/15

Keys, Doors, and Windows

The key is used for the driver door.

The transmitter has a button on the
side used to remove the key. Do not
pull the key out without pressing the
button.

See your dealer if a replacement
key or additional key is needed.

With an active OnStar subscription,
an OnStar Advisor may remotely
unlock the vehicle. See

OnStar

Overview

376

Remote Keyless Entry
(RKE) System

See

Radio Frequency Statement

373

If there is a decrease in the RKE
operating range:

Check the distance. The
transmitter may be too far from
the vehicle.

Check the location. Other
vehicles or objects may be
blocking the signal.

Check the transmitter's battery.
See

“

Battery Replacement

”

later

in this section.

If the transmitter is still not
working correctly, see your
dealer or a qualified technician
for service.

Remote Keyless Entry
(RKE) System Operation

The Keyless Access system allows
for vehicle entry when the
transmitter is within 1 m (3 ft). See

“

Keyless Access Operation

”

later in

this section.

The RKE transmitter functions may
work up to 60 m (197 ft) away from
the vehicle.

Summary of Contents for Escalade 2016














































































































































































































































































































































































































Search results

Summary of Contents for Escalade 2016

Reviews:

Related manuals for Escalade 2016

Brands by name

Popular brands

Cadillac Escalade 2016, Owner'S Manual

Search results

Summary of Contents for Escalade 2016

Reviews:

Related manuals for Escalade 2016

Brands by name

Popular brands