Cadillac Escalade 2016 Owner'S Manual Download Page 18

Page: 18 / 397

Cadillac Escalade Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-

9159314) - 2016 - crc - 6/25/15

In Brief

Press

next to each reading

lamp to turn it on or off.

For more information about interior
lighting, see

Instrument Panel

Illumination Control

173

Exterior Lighting

The exterior lamp control is on the
instrument panel to the left of the
steering wheel.

Turns off the automatic

headlamps and Daytime Running
Lamps (DRL). Turning the headlamp
control to the off position again will
turn the automatic headlamps and
DRL back on.

For vehicles first sold in Canada,
the off position only works when the
vehicle is shifted into the P (Park)
position.

AUTO :

Automatically turns the

exterior lamps on and off,
depending on outside lighting.

;

Turns on the parking lamps

including all lamps, except the
headlamps.

Turns on the headlamps

together with the parking lamps and
instrument panel lights.

See:

Exterior Lamp Controls

168

Daytime Running Lamps (DRL)

170

Automatic Headlamp System

171

Windshield Wiper/Washer

The windshield wiper control is on
the turn signal lever.

The windshield wipers are controlled
by turning the band with

FRONT on it.

Fast wipes.

Slow wipes.

INT :

Use this setting for

intermittent wipes or Rainsense

™

For intermittent wipes, turn the

Summary of Contents for Escalade 2016














































































































































































































































































































































































































Search results

Summary of Contents for Escalade 2016

Reviews:

Related manuals for Escalade 2016

Brands by name

Popular brands

Cadillac Escalade 2016, Owner'S Manual

Search results

Summary of Contents for Escalade 2016

Reviews:

Related manuals for Escalade 2016

Brands by name

Popular brands