Cadillac ELR 2015 Owner'S Manual Download Page 21

Page: 21 / 407

Black plate (14,1)

Cadillac ELR Owner Manual (GMNA-Localizing-U.S./Canada-7695154) -

2015 - CRC - 4/25/14

1-14

In Brief

;

Turns on the parking lamps

including all lamps, except the
headlamps.

Turns on the headlamps

together with the parking lamps and
instrument panel lights.

See

Exterior Lamp Controls on

page 6-1

and

Daytime Running

Lamps (DRL) on page 6-4

Windshield Wiper/Washer

With the ignition in ACC/
ACCESSORY or ON/RUN/START,
move the lever to select the wiper
speed.

HI:

Use for fast wipes.

LO:

Use for slow wipes.

INT:

Move the windshield wiper

lever to INT. Turn the

INT band

up for more frequent wipes or down
for less frequent wipes. If equipped
with Rainsense, turn the

INT

band to adjust the sensitivity. To turn
the Rainsense feature on or off, see

“

Rain Sense Wipers

”

under

Vehicle

Personalization on page 5-52

OFF:

Use to turn the wipers off.

1X :

For a single wipe, briefly move

the lever down. For several wipes,
hold the lever down.

Pull the lever toward you to

spray windshield washer fluid and
activate the wipers.

See

Windshield Wiper/Washer on

page 5-3

Summary of Contents for ELR 2015
























































































































































































































































































































































































































Search results

Summary of Contents for ELR 2015

Reviews:

Related manuals for ELR 2015

Brands by name

Popular brands

Cadillac ELR 2015, Owner'S Manual

Search results

Summary of Contents for ELR 2015

Reviews:

Related manuals for ELR 2015

Brands by name

Popular brands