Cadillac ELR 2015 Owner'S Manual Download Page 166

Page: 166 / 407

Black plate (57,1)

Cadillac ELR Owner Manual (GMNA-Localizing-U.S./Canada-7695154) -

2015 - CRC - 4/25/14

Instruments and Controls

5-57

Remote Unlock Light Feedback

When on, the exterior lamps will
flash when unlocking the vehicle
with the RKE transmitter.

Select Off or Flash Lights.

Remote Lock Feedback

This allows selection of what type of
feedback is given when locking the
vehicle with the RKE transmitter.

Select Off, Lights and Horn, Lights
Only, or Horn Only.

Remote Door Unlock

This allows selection of which doors
will unlock when pressing

on the

RKE transmitter.

Select All Doors or Driver Door.

Remote Start Auto Heat Seats

If equipped and turned on, this
feature will turn the heated seats on
when using remote start on
cold days.

Select Off or On.

Passive Door Unlock

This allows the selection of what
doors will unlock when using the
door handle touch pad button on the
driver door to unlock the vehicle.

Select All Doors or Driver Door.

Passive Door Lock

This allows passive locking to be
turned on or off and selects
feedback. See

“

Passive Locking

”

Remote Keyless Entry (RKE)
System Operation on page 2-2

Select Off, On with Horn
Chirp, or On.

Remote Left in Vehicle Alert

This feature sounds an alert when
the RKE transmitter is left in the
vehicle.

Select Off or On.

Bluetooth

Select and the following may
display:

Pair New Device

Device Management

Ringtones

Voice Mail Numbers

Pair New Device

Select to pair a new device. See

“

Pairing

”

“

Infotainment Controls

”

under

“

Bluetooth

”

in the infotainment

manual.

Device Management

Select to connect to a different
phone source, disconnect a phone,
or delete a phone.

Ringtones

Press to change the ring tone for
the specific phone. The phone does
not need to be connected to change
the ring tone.

Summary of Contents for ELR 2015
























































































































































































































































































































































































































Search results

Summary of Contents for ELR 2015

Reviews:

Related manuals for ELR 2015

Brands by name

Popular brands

Cadillac ELR 2015, Owner'S Manual

Search results

Summary of Contents for ELR 2015

Reviews:

Related manuals for ELR 2015

Brands by name

Popular brands