manualshive.com logo in svg

Cadillac ELR 2015, Owner'S Manual

The Cadillac ELR 2015 Owner's Manual is your go-to guide for maximizing the potential of your sleek and sophisticated electric car. Unlock the full potential of this luxury vehicle by downloading the comprehensive manual for free from manualshive.com, ensuring you have all the information at your fingertips.

Share
Download
background image

Black plate (33,1)

Cadillac ELR Owner Manual (GMNA-Localizing-U.S./Canada-7695154) -

2015 - CRC - 4/25/14

Instruments and Controls

5-33

Press one of the following options to
select the Charge Rate Preference:

.

Charge during Peak, Mid-Peak,
and Off-Peak Rates: The vehicle
can charge during any rate
period to satisfy the next
planned departure time.
However, it will select when to
charge to minimize the total cost
of the charge.

.

Charge during Mid-Peak and
Off-Peak Rates: The vehicle will
charge during Off-Peak and/or
Mid-Peak rate periods only and
will select when to charge to
minimize the total cost of the
charge.

.

Charge during Off-Peak Rates:
The vehicle will only charge
during Off-Peak rate periods.

Charging begins at the start time
and is complete by the departure
time only if sufficient time is allowed
after the charge cord is plugged in.
For example, if the vehicle is
plugged in for only one hour prior to
the departure time, and the battery

is completely discharged, the
vehicle will not be fully charged by
the departure time regardless of the
rate selection.

Also, if the selected electric rate
settings result in a very long charge
completion time, the vehicle will
start charging immediately upon
plug-in. For example, if the electric
rate table is set up with all

“

Peak

”

rates and the rate preference is to
charge during

“

Off-Peak

”

rates only,

then the vehicle will start charging
immediately upon plug-in.

Electric Rate Plan Selection

Electric rates, or cost per unit, may
vary based on time, weekday/
weekend, and season. During the
day when the demand for electricity
is high, the rates are usually higher
and called Peak rates. At night
when the demand for electricity is
low, the rates are usually lower and
called Off-Peak rates. In some
areas, a Mid-Peak rate is offered.

Contact the utility company to obtain
the rate schedule for your area. The
summer and winter start dates must
be established to use a summer/
winter schedule.

From the Charge Rate Information
screen, press Electric Rate
Schedule button.

To edit the Summer/Winter
Schedule:

1. Select Summer/Winter for the

Rate Schedule Type.

2. Press Edit Electric Rate

Schedule.

Summary of Contents for ELR 2015
























































































































































































































































































































































































































Reviews:

No comments

Related manuals for ELR 2015

ZAPTEC Go Quick Manual preview
Go
Brand: ZAPTEC Pages: 64
ZAPTEC Go Installation Manual preview
Go
Brand: ZAPTEC Pages: 24
Quadratec QR3 Installation Manual preview
QR3
Brand: Quadratec Pages: 8
Vauxhall Meriva Quick Reference Manual preview
Meriva
Brand: Vauxhall Pages: 2
Vauxhall Ampera Quick Reference Manual preview
Ampera
Brand: Vauxhall Pages: 2
Vauxhall 2012 Agila Quick Reference Manual preview
2012 Agila
Brand: Vauxhall Pages: 2
Vauxhall 2013 Mokka Owner'S Manual preview
2013 Mokka
Brand: Vauxhall Pages: 209
VBC Racing WildFire Instruction Manual preview
WildFire
Brand: VBC Racing Pages: 34
Vauxhall 2013 Corsa Infotainment system Quick Reference Manual preview
2013 Corsa Infotainment system
Brand: Vauxhall Pages: 2
Vauxhall 2010 Astra Quick Reference Manual preview
2010 Astra
Brand: Vauxhall Pages: 2
Vauxhall Antara Owner'S Manual preview
Antara
Brand: Vauxhall Pages: 236
NavLinkz CAM-N-CV133-V Manual preview
CAM-N-CV133-V
Brand: NavLinkz Pages: 4
Kia 2016 Cadenza Owner'S Manual preview
2016 Cadenza
Brand: Kia Pages: 419
SuperATV AAB-P-RZR900-K2-001 Installation Instructions preview
AAB-P-RZR900-K2-001
Brand: SuperATV Pages: 3
Edelbrock For 1985-1992 GM Cars and Trucks 17933 Installation Instructions preview
For 1985-1992 GM Cars and Trucks 17933
Brand: Edelbrock Pages: 4
Dacia 2014 Sandero Driver'S Handbook Manual preview
2014 Sandero
Brand: Dacia Pages: 238
Wagan Road Ready Seat Protector User Manual preview
Road Ready Seat Protector
Brand: Wagan Pages: 12
Chevrolet 2016 Suburban Owner'S Manual preview
2016 Suburban
Brand: Chevrolet Pages: 50

Brands by name

Popular brands

Load more brands