Cadillac ELR 2015 Owner'S Manual Download Page 328

Page: 328 / 407

Black plate (67,1)

Cadillac ELR Owner Manual (GMNA-Localizing-U.S./Canada-7695154) -

2015 - CRC - 4/25/14

Vehicle Care

10-67

If a tire goes flat, avoid further tire
and wheel damage by driving slowly
to a level place. Turn on the hazard
warning flashers. See

Hazard

Warning Flashers on page 6-5

See

If a Tire Goes Flat on

page 10-61

for other important

safety warnings.

1. Remove the tire sealant and

compressor kit from its storage
location. See

Storing the Tire

Sealant and Compressor Kit on
page 10-69

2. Unwrap the air only hose (7) and

the power plug (8).

3. Place the kit on the ground.

Make sure the tire valve stem is
positioned close to the ground
so the hose will reach it.

4. Remove the tire valve stem cap

from the flat tire by turning it
counterclockwise.

5. Attach the air only hose (7) onto

the tire valve stem by turning it
clockwise until it is tight.

6. Plug the power plug (8) into the

accessory power outlet in the
vehicle. Unplug all items from
other accessory power outlets.
See

Power Outlets on page 5-7

If the vehicle has an accessory
power outlet, do not use the
cigarette lighter.

If the vehicle only has a cigarette
lighter, use the cigarette lighter.

Do not pinch the power plug
cord in the door or window.

7. Start the vehicle. The vehicle

must be running while using the
air compressor.

8. Press and turn the selector

switch (1) clockwise to the Air
Only position.

9. Press the on/off button (2) to

turn the compressor on.

The compressor will inflate the
tire with air only.

Summary of Contents for ELR 2015
























































































































































































































































































































































































































Search results

Summary of Contents for ELR 2015

Reviews:

Related manuals for ELR 2015

Brands by name

Popular brands

Cadillac ELR 2015, Owner'S Manual

Search results

Summary of Contents for ELR 2015

Reviews:

Related manuals for ELR 2015

Brands by name

Popular brands