Cadillac ELR 2015 Owner'S Manual Download Page 349

Page: 349 / 407

Black plate (88,1)

Cadillac ELR Owner Manual (GMNA-Localizing-U.S./Canada-7695154) -

2015 - CRC - 4/25/14

10-88

Vehicle Care

Removing and Replacing the
Floor Mats

Pull up on the rear of the floor mat
to unlock each retainer and remove.

Reinstall by lining up the floor mat
retainer openings over the carpet
retainers and snap into position.

Make sure the floor mat is properly
secured in place.

Verify the floor mat does not
interfere with the pedals.

Summary of Contents for ELR 2015
























































































































































































































































































































































































































Search results

Summary of Contents for ELR 2015

Reviews:

Related manuals for ELR 2015

Brands by name

Popular brands

Cadillac ELR 2015, Owner'S Manual

Search results

Summary of Contents for ELR 2015

Reviews:

Related manuals for ELR 2015

Brands by name

Popular brands