Cadillac CTS - 2005 Owner'S Manual Download | Manualshive

Page: 6 / 124

background image

Screen Features

A. Driver Information Center (DIC) Line: See “Vehicle
Information” under Main Menu on page 1-6 Main
Menu and Driver Information Center (DIC) on page 5-14
of your vehicle’s owner manual for more information.

B. Banner: Here is where you will find the title for
most screens and menus. This information cannot be
edited.

C. Radio Station Information: Here is where you will
find current radio frequency and Radio Data System
(RDS) station identification information. The information
to the right of the frequency is RDS emergency alert,
traffic announcements, and program type (PTY).

You will see Emergency Test when the RDS station you
are tuned to conducts a test of the local emergency
broadcast system. If there is a real emergency, you will
see Emergency on the screen and further information
will be provided.

Traffic will appear next to the frequency when a station
supports the traffic feature. The traffic symbol will be
displayed in the lower left corner of the navigation
screen when traffic announcements have been enabled
by pressing the TRAF key.

D. Radio Data System (RDS): Here is where you will
find RDS broadcast information if the RDS Message
feature is on. See Navigation Audio System on page 3-2
Navigation Audio System for more information.

1-4

«
...
4
5
6
7
8
...
»

Summary of Contents for CTS - 2005





























































































































Reviews:

No comments

Related manuals for CTS - 2005

MITO Uconnect 5" Radio Nav LIVE

Brand: Alfa Romeo Pages: 99

In-Car Video System

Brand: 10-8 Video Digital Evidence Solutions Pages: 64

Brand: Nav TV Pages: 8

Brand: Sound Storm Pages: 26

Gem AQUARIUS F990

Brand: Tyco Fire Product Pages: 12

Brand: Honda Pages: 253

Brand: Pioneer Pages: 128

Opto-Matic 30078

Brand: Trico Pages: 2

Brand: VMS Pages: 24

Brand: Nextar Pages: 11

Brand: Fiskars Pages: 21

Brand: Viking Pages: 26

Brand: Naxa Pages: 13

Brand: NavRoad Pages: 126

Brand: Elta Pages: 58

Brand: Elta Pages: 71

Brand: Elta Pages: 86

Brand: Dual Pages: 20

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands